Apex Legends FPS Calculator — GPU Benchmark Table & Best Settings

Apex Legends runs on a modified Titanfall engine — not Unreal Engine, not Source 2. This engine is well-optimized and CPU-efficient compared to modern engines, but it has a hard FPS cap at 300 FPS that EA has not raised since Season 13. No GPU or CPU can display more than 300 FPS in Apex Legends regardless of hardware. This page gives you the FPS to expect at each GPU tier and the settings that push you toward that 300 FPS cap.

Use our FPS Calculator to check your specific hardware.

Apex Legends FPS by GPU — Benchmark Table (1080p, July 2026)

Data sourced from dropreference.com Apex Legends GPU benchmark database , betterfps.com RTX 4060 Apex 1440p settings data.

At 1440p, the RTX 4060 averages 109-139 FPS depending on settings (betterfps.com RTX 4060 Apex 1440p data). The RTX 4070 at 1440p Low settings reaches 195 FPS, which is near the practical performance ceiling for most setups since Apex is CPU-sensitive above 200 FPS.

Apex Legends 300 FPS Cap , What It Means for GPU Choice

Apex Legends has a hard 300 FPS cap built into the engine. This limit was added in Season 13 and has not been changed.

What this means for GPU selection: any GPU capable of pushing above 300 FPS at your resolution and settings is completely equivalent in Apex. An RTX 4070 and an RTX 4090 both hit the 300 FPS cap in Apex at 1080p low settings the extra power of the 4090 is wasted.

For 300 FPS at 1080p low settings, the minimum GPU is approximately RTX 4060 Ti paired with a strong CPU. Weaker GPUs (RTX 4060, RX 7600) reach 245-265 FPS at 1080p low, which is close but occasionally misses the cap.

For 1440p, no GPU currently hits 300 FPS at any practical settings in Apex Legends. The RTX 4070 reaches approximately 195 FPS at 1440p low — the best achievable.

Best Apex Legends Settings for Maximum FPS (2026)

• Display Mode: Fullscreen
• Resolution: 1920×1080 (or native)
• Field of View: 104 (maximum — wider FOV has minimal FPS impact and improves awareness)
• V-Sync: Disabled
• Adaptive Resolution FPS Target: 0 (disabled)
• Anti-Aliasing: None (TSAA adds blur; None gives sharpest image for tracking)
• Texture Streaming Budget: 4GB (match to your GPU VRAM tier)
• Texture Filtering: Bilinear
• Ambient Occlusion Quality: Disabled (largest FPS gain in Apex)
• Sun Shadow Coverage/Detail: Low
• Spot Shadow Detail: Disabled
• Volumetric Lighting: Disabled
• Dynamic Spot Shadows: Disabled
• Model Detail: Medium (Low makes characters harder to distinguish at range)
• Effects Detail: Low
• Impact Marks: Disabled
• Ragdolls: Low
• NVIDIA Reflex: On + Boost (RTX cards) / AMD Anti-Lag: On (RX 7000 cards)

Expected FPS at these settings (RTX 4060 Ti, 1080p): 270-300 FPS.

Apex Legends CPU Requirements at High Frame Rates

Apex Legends becomes CPU-sensitive above 200 FPS. The Titanfall-based engine uses multiple threads efficiently, better than CS2 , but still shows CPU limits at extreme frame rates.

To consistently reach the 300 FPS cap, you need both a tier-A GPU and a high-clock, modern CPU. The Ryzen 7 7800X3D is the most common choice for this target.

Why Is My Apex Legends FPS Dropping Mid-Match?

Adaptive Resolution is active. Apex has a built-in adaptive resolution feature that lowers render resolution automatically when FPS drops, causing visual blur. Set Adaptive Resolution FPS Target to 0 to disable it entirely.

Ambient Occlusion is on. AO is the most expensive Apex setting per FPS recovered. Disabling it recovers 15-25 FPS at any resolution.

You are in a high-player-count zone. King’s Canyon and Broken Moon maps have specific areas where 60 players dropping simultaneously creates a CPU spike. This is a known engine limitation.

TSAA anti-aliasing is on. TSAA adds temporal blurring that obscures moving targets. Switching to None recovers 5-10 FPS while improving visual clarity.

Frequently Asked Questions

What FPS does the RTX 4060 get in Apex Legends?

At 1080p low settings: approximately 245 FPS average. At 1440p low: 125 FPS average. At 1440p optimized settings: 109-139 FPS depending on scene (betterfps.com RTX 4060 Apex 1440p benchmark).

What is the FPS cap in Apex Legends?

300 FPS. This is a hard engine cap added in Season 13. No GPU or CPU configuration can exceed 300 FPS in Apex Legends, regardless of hardware tier.

What GPU do I need for 240 FPS Apex Legends at 1080p?

RTX 4060 Ti or RX 7700 XT paired with a Ryzen 5 7600 or Core i5-13400F or better. The RTX 4060 reaches approximately 245 FPS — close but occasionally dips below 240 on demanding maps.

Is Apex Legends GPU or CPU intensive?

GPU-intensive at medium-high settings. CPU-intensive above 200 FPS at low settings, where CPU per-core performance and memory latency become the limiting factors.

Does Apex Legends support ray tracing?

No. Apex Legends does not support ray tracing. The Titanfall-based engine does not use RT features.

What resolution is best for competitive Apex Legends?

1080p. The 300 FPS cap means 1080p gives the highest achievable frame rates. At 1440p, no current GPU combination hits 300 FPS.

FPS Calculator | FPS Counter Online | Refresh Rate Test