RX 7800 XT Warzone FPS — 1080p & 1440p Benchmark
The RX 7800 XT is AMD’s 1440p GPU. In Warzone, it has a specific advantage over the RTX 4060 Ti: 16GB of GDDR6 VRAM versus 8GB. Warzone’s uncompressed texture packs push above 8GB at high settings meaning the RTX 4060 Ti stutters even when GPU utilization is low, while the RX 7800 XT does not.
The FPS numbers at both resolutions, the settings that produce the best results, and the FSR configuration that maximises frame rate without visible quality loss.
RX 7800 XT Warzone FPS — Benchmark Table
| Settings | Resolution | Avg FPS | 1% Low FPS |
| Max (Ultra) | 1080p | 180 | 130 |
| Competitive (optimized) | 1080p | 220+ | 165 |
| Max (Ultra) | 1440p | 130 | 95 |
| Balanced (optimized) | 1440p | 160 | 115 |
| Competitive (low shadows) | 1440p | 180 | 135 |
| Competitive + FSR 3.1 Quality | 1440p | 200+ | 155 |
Data referenced from Switchblade Gaming RX 7800 XT settings guide (verified AMD Adrenalin 25.3 / March 2026) and EveZone performance testing.
The 16GB VRAM Advantage in Warzone
Warzone’s high-resolution texture pack is the specific reason the RX 7800 XT outperforms the RTX 4060 Ti in this game.
When VRAM fills on an 8GB card, the GPU offloads textures to system RAM. System RAM is 3-5x slower than GDDR6 VRAM. The result is stutter FPS spikes downward even when average FPS looks fine. This happens on the RTX 4060 Ti (8GB) with Warzone’s texture quality above Normal.
The RX 7800 XT’s 16GB buffer means it never hits this limit. You can run Ultra textures at 1440p without stutter. The RTX 4060 Ti cannot.
Practical impact: At 1440p with high textures, the RX 7800 XT delivers 30-40% better 1% low FPS than the RTX 4060 Ti in Warzone not because of raw GPU power, but because the VRAM ceiling is never reached.
RX 7800 XT vs RTX 4060 Ti in Warzone
| GPU | 1080p Competitive Avg FPS | 1440p Competitive Avg FPS | VRAM |
| RX 7800 XT | 220 | 180 | 16GB |
| RTX 4060 Ti | 185 | 145 | 8GB |
| Advantage | +19% | +24% | +8GB |
At 1440p with high-resolution textures enabled, the gap widens because the RTX 4060 Ti experiences stutter as it hits its 8GB limit. The RX 7800 XT does not stutter under these conditions.
The RX 7800 XT also consistently beats the RTX 4070 by 4-9% in rasterization benchmarks at 1440p while costing $100-150 less (as of 2026 pricing).
Best Warzone Settings for RX 7800 XT (2026)
1440p Competitive Settings
- Display Mode: Fullscreen Exclusive (lowest latency, highest FPS)
- Resolution: 2560×1440
- Render Resolution: 100 (native)
- Upscaling/Sharpening: FidelityFX CAS at 80 (sharpens without blurring textures)
- Anti-Aliasing: Filmic SMAA T2X
- Video Memory Scale: 90
- Texture Resolution: High (Normal saves VRAM but reduces clarity unnecessarily — 16GB handles High)
- Texture Filter Anisotropic: High
- Nearby Level of Detail: High
- Distant Level of Detail: Medium
- Clutter Draw Distance: Short (large FPS gain, minimal visual impact at range)
- Shader Quality: Low (big FPS gain in Warzone specifically)
- Shadow Map Resolution: Low (High-res shadows are the largest single FPS drain)
- Screen Space Shadows: Low
- Ambient Occlusion: Disabled (minimal visual impact in an outdoor battle royale)
- Spot Cache: High (reduces area-load stutter)
- Particle Quality: Low
- Motion Blur: Off (all blur settings off for competitive tracking)
- AMD Anti-Lag: On (reduces input latency without affecting FPS)
Expected result at these settings: 180-200 FPS average at 1440p with 1% lows above 135 FPS.
FSR 3.1 Configuration for RX 7800 XT
FSR 4 is not available on the RX 7800 XT. AMD confirmed at CES 2026 that RDNA 3 lacks the FP8 compute required for native FSR 4. Use FSR 3.1 Quality mode.
In Warzone: set Upscaling to FidelityFX Super Resolution 3.1, quality preset to Quality. This renders at approximately 67% of target resolution. At 1440p output, internal render resolution is approximately 960p the upscaling algorithm recovers most of the sharpness.
Frame Generation in Warzone: Disable AMD Fluid Motion Frames (AFMF 2) for Warzone. The added latency from frame interpolation hurts reaction time more than the smoother motion helps. AFMF 2 is better suited for single-player titles where input timing is less critical.
RX 7800 XT Warzone: AMD-Specific Performance Tips
Tip 1 — Undervolting improves performance
The RX 7800 XT undervolts exceptionally well. Reducing GPU voltage by 50-100mV in AMD Adrenalin Manual tuning drops temperatures 5-10°C and reduces power draw by 20-35W. Lower temps mean the GPU boosts higher and holds its boost clock more consistently. Community testing shows the RX 7800 XT maintains competitive performance equivalent to the RTX 4070 while consuming significantly less power after undervolting.
Tip 2 — Enable Hardware-Accelerated GPU Scheduling
Windows Settings → Display → Graphics → Change default graphics settings → Hardware-Accelerated GPU Scheduling → On. This applies on RDNA 3 hardware and reduces CPU overhead when preparing frames for the GPU.
Tip 3 — AMD Anti-Lag vs Anti-Lag+
Anti-Lag reduces latency by synchronizing CPU and GPU workloads. Anti-Lag+ (available in supported titles) reduces latency further by adjusting input timing at the game level. In Warzone, use standard Anti-Lag if Anti-Lag+ is not available.
Tip 4 — Use Exclusive Fullscreen, not Borderless
Borderless windowed mode adds a compositor frame of latency. In competitive Warzone, Exclusive Fullscreen mode is consistently 3-8ms faster in response time.
RX 7800 XT Warzone 1080p — Is It Overkill?
At 1080p with competitive settings, the RX 7800 XT averages 220+ FPS. For a 240Hz monitor this clears the target. For a 144Hz monitor it is well past sufficient.
For 1080p Warzone specifically, the RX 7800 XT is more GPU than the game requires. The RTX 4060 or RTX 4060 Ti are sufficient for 1080p 144Hz in Warzone without the VRAM constraints that cause 1440p problems.
The RX 7800 XT earns its price at 1440p, where the 16GB VRAM, bandwidth advantage, and raw rasterization performance combine to deliver a genuinely different experience.
Frequently Asked Questions
What FPS does the RX 7800 XT get in Warzone?
At 1440p competitive settings: 180 FPS average with 1% lows around 135 FPS. At 1080p competitive: 220+ FPS. With FSR 3.1 Quality enabled at 1440p: 200+ FPS.
Is the RX 7800 XT better than RTX 4060 Ti for Warzone?
Yes, notably. The RX 7800 XT produces 19-24% more FPS at competitive settings and eliminates the VRAM stutter that affects the RTX 4060 Ti at 1440p with high textures. The 16GB VRAM buffer is a real advantage in Warzone specifically.
Does FSR 4 work on RX 7800 XT?
No. FSR 4 requires RDNA 4 hardware (RX 9000 series). AMD confirmed at CES 2026 that RDNA 3 does not support FSR 4 natively. Use FSR 3.1 Quality mode, which remains a high-quality upscaler at 1440p.
What CPU pairs best with RX 7800 XT for Warzone?
Ryzen 5 7600, Ryzen 7 7800X3D, or Core i5-13600K. Warzone is CPU-sensitive above 150 FPS a balanced mid-range CPU is sufficient. The 7800X3D’s large L3 cache helps in CPU-bound scenarios at very high frame rates.
Why does Shadow Map Resolution matter so much in Warzone?
Shadow Map Resolution is the largest single performance drain in Warzone. Switching from Ultra to Low recovers 20-30 FPS at 1440p with almost no competitive visibility impact — enemies are not significantly harder to spot without ultra-resolution shadows. It is the first setting to lower.
Is the RX 7800 XT good for 1440p 144Hz Warzone?
Yes. It averages 160-180 FPS at 1440p balanced settings, which clears 144Hz with comfortable headroom in 1% lows. For a 1440p 144Hz monitor, the RX 7800 XT is one of the best-value GPUs available in 2026.
Settings data verified on AMD Adrenalin 25.3, March 2026. Benchmark data referenced from Switchblade Gaming RX 7800 XT guide and EveZone performance testing. Updated July 2026.
Use our FPS Calculator | FPS Counter Online | Refresh Rate Test
